The Telescopic Flagpole Triple Arm model has three banners, which can either be Single-Reverse or Double-Sided. The three flags can have up to six different images,
six of the same image, or any combination in between. The lightweight and strong hardware can be adjusted and transported easily. When the collapsible flagpole is at its
tallest height, it reaches just under 18 ft. This allows you to take the Telescopic Flagpole to trade shows, tail gating parties, or other events which require a larger display system. The banner arms top and bottom keep your flags straight, and without a mess. The height of the pole can be adjusted by sliding it up and clicking it into place at each notch. A Flagpole Stabilizer is required if using with the Cross Stand Large or the Water Base.
The silver, sleek design of the hardware creates an appealing appearance. Different base options allow for complete customization. Several accessories are available for the Telescopic Flagpole. The detachable Table for this flagpole can display brochures, product samples, drinks, food, and other small items at a trade show or other event. The Table rests on the Flagpole Stabilizer, which means it can only be used with a base that requires one, including the Water Base and the Cross Stand Large. The Weight Bag Large is an accessory that is strongly recommended for the Cross Stand Large and the Base Plate 22"x22". If you choose one of these two bases you will receive the Weight Bag Large included with that base. Filled with water, the Weight Bag Large adds an additional and needed 100 lbs to the base, stabilizing the flagpole for security. The Triple Arm Telescopic Flagpole withstands wind speeds 7-12mph or 3bft. This flagpole is not recommended for harsh weather conditions or wind speeds higher than the recommended. Please also be careful of positioning, as not to place near power lines, or other electrical wires. For more information on the bases, please check out our Bases and Accessories tab.
You can use your own custom artwork by uploading your graphic, or if you like one of the Bowflag® Stock Designs but need it on this product, please Contact Us. You will receive a free PDF proof emailed to you, and there is no printing setup fee. Our printing materials include polyester, vinyl, displaypoly, and photo paper. See the "Printing / Finishing" tab for material choices and information.
Our Telescopic Flagpole flags are printed on a polyester material, and are produced with current ink technologies. The fabric we offer is Polyflag Standard, our recommended and standard flag material, which is a knitted polyester resistant to tearing, with an excellent through-print. Our flags can either be finished Single-Reverse or Double-Sided.
- Single-Reverse: A flag is printed on one side and the image shows through to the other side as a mirror image.
- Double-Sided: A flag has two positive prints sewn together pillow case style, with a light-blocking inner liner.
Telescopic Flagpole Material Option:
- Standard flag material
- Excellent through print for Single-Reverse flags and banners
- Flame retardant
- Excellent for outdoor flags and displays
For a full description of all our fabrics offered, please see the Fabric Overview page.